ICC Chimney and Venting

Per Page

64 Results

Industrial Chimney Company (ICC):

Industrial Chimney Company (ICC) was established in 1991 by a small group of partners with over 75 years combined experience in the chimney industry. Their experience made it clear that the needs of end users – those with one of our chimneys in their homes – are best served when our products are sold by specialized chimney and fireplace retailers. From the very beginning, their central objective has been to engineer products that enable better and faster installations while using fewer parts, thereby improving installation efficiency. This is their best way of ensuring that consumers benefit from safer installations and competitive pricing. Their goal is to do everything possible to help all business partners perform the best installation possible for homeowners.

 
Explore Further:

Q. What products does ICC manufacture?

A. ICC produces a range of venting systems, including residential and commercial chimneys, insulated stainless steel chimneys, and stove pipes. They also design fireplaces and specialty grills under various brands like RSF, Renaissance, and Le BOL Grill.

Q. What does the term “zero clearance” mean?

A. All of ICC's fireplaces are considered zero clearance. Zero clearance means that the fireplace requires no clearance from nearby combustible materials on any side, except the front. Any framing materials can be used. They can be tight against the fireplace body or in the form of standoffs. Zero clearance fireplaces require no special footings to set the fireplace in place allowing it to be placed directly on the floor. The final result is a clean-finished fireplace built into the wall.

Q. What distinguishes ICC’s chimney systems?

A. ICC emphasizes innovative engineering, making installation more efficient by reducing the number of components needed. Their chimneys are designed to be safe, efficient, and competitively priced.

Q. Does ICC offer solutions for both residential and industrial applications?

A. Yes, ICC provides solutions for residential use (such as wood and pellet stove vents) and for industrial applications (like high-pressure and grease ducts for commercial needs).

Q. Which brands are part of ICC?

A. ICC owns brands such as RSF Fireplaces, Renaissance Fireplaces, ICC Chimney, and Le BOL Grill, covering a wide array of heating and cooking solutions.

Q. Where can I purchase ICC products?

A. ICC products are distributed through specialty dealers and retailers. They recommend purchasing through these channels to ensure proper installation support and technical assistance.

Q. What warranties are available for ICC products?

A. ICC offers warranties that reflect the durability and reliability of their products. Specific warranty details vary by product type and brand.

Q. How does ICC support environmental sustainability?

A. ICC integrates sustainability by designing high-efficiency, clean-burning fireplaces and venting systems, ensuring lower emissions and better energy usage.

Q. At what stage during home building should I have my fireplace installed?

A. If you are building a new home, the best time to have your fireplace installed is immediately after the roof has been finished. At this point the inside walls are still typically open framing which allows for the fireplace to be placed and framed without damaging finished walls. The fireplace can be installed and set in place long before the finishing work is completed. Make sure you protect the glass door (keep it covered and removed from the work zone) until construction is complete.

Q. Will my fireplace operate during an electrical outage?

A. Yes. Since the fireplace works using natural draft, it never requires any electricity to function. It is safe to operate even if you have blowers installed to move the heat around.

  • The ExcelDirect venting system is the simplest in the industry to install; simply push the pieces together and secure the union with the three included screws. Unlike aluminum, which can distort its structure and cause leaks, this system is leak-free because to its self-sealing technology and laser welded stainless steel inner pipe.

    Issue rendering sage
  • The ExcelDirect venting system is the simplest in the industry to install; simply push the pieces together and secure the union with the three included screws. Unlike aluminum, which can distort its structure and cause leaks, this system is leak-free because to its self-sealing technology and laser welded stainless steel inner pipe.

    Issue rendering sage
  • The vertical component of the slip elbow, like a slip section of pipe, slips over a standard length.
    There is no need for a separate slip piece now. It is possible to accomplish the installation in less time and with fewer joints.

    Issue rendering sage
  • This is an official ICC Excel Chimney Storm Collar.  These genuine parts ship new in original manufacturer packaging.

    Issue rendering sage
  • These are typically used as decorative covers when installing a wall thimble in a gas stove
    application. On vertical installations they can serve as firestops when installed from below. They
    can also serve as a firestop on horizontal installations that don’t require a wall thimble (i.e. a fully
    non-combustible wall). The Trim Ring (TR) is larger and round and the Trim Plate (TP) is smaller and
    square. Available in black only.
    All EXCELDirect trims include a rubberized O-ring to seal the gap between the trim and vent.

    Issue rendering sage
  • Required when siding is more than 1 1/2" deep. Prevents damage to temperature sensitive siding
    materials such as vinyl, shakes or shingles. For use with horizontal terminations only.

    Issue rendering sage
  • EXCELDirect® elbows are available in Black or Galvalume. The stainless
    steel inner casings are seam welded to ensure there is no leakage.

    Issue rendering sage
  • Made of galvalume, this flashing can be cut,
    bent, or secured with silicone to the top of a
    masonry chimney

    Issue rendering sage
  • Used to securely join two lengths of flex without tearing them with this adapter from Excel Direct.

    Issue rendering sage
  • Wind and Rain Shields are available as an option to prevent problems caused by strong winds or heavy rain.

    Issue rendering sage
  • Horizontal terminations have been tested in high-wind circumstances and have proven to be reliable even in winds of up to 40 mph. The length between the terminations is a slip section that allows for wall modification. Built-in vinyl siding standoffs for siding up to 1½" deep are included with all Horizontal Terminations. An extra Vinyl Siding Standoff (VSS) is required for deeper siding.

    Issue rendering sage
To top