ICC Chimney and Venting

Per Page

64 Results

Industrial Chimney Company (ICC):

Industrial Chimney Company (ICC) was established in 1991 by a small group of partners with over 75 years combined experience in the chimney industry. Their experience made it clear that the needs of end users – those with one of our chimneys in their homes – are best served when our products are sold by specialized chimney and fireplace retailers. From the very beginning, their central objective has been to engineer products that enable better and faster installations while using fewer parts, thereby improving installation efficiency. This is their best way of ensuring that consumers benefit from safer installations and competitive pricing. Their goal is to do everything possible to help all business partners perform the best installation possible for homeowners.

 
Explore Further:

Q. What products does ICC manufacture?

A. ICC produces a range of venting systems, including residential and commercial chimneys, insulated stainless steel chimneys, and stove pipes. They also design fireplaces and specialty grills under various brands like RSF, Renaissance, and Le BOL Grill.

Q. What does the term “zero clearance” mean?

A. All of ICC's fireplaces are considered zero clearance. Zero clearance means that the fireplace requires no clearance from nearby combustible materials on any side, except the front. Any framing materials can be used. They can be tight against the fireplace body or in the form of standoffs. Zero clearance fireplaces require no special footings to set the fireplace in place allowing it to be placed directly on the floor. The final result is a clean-finished fireplace built into the wall.

Q. What distinguishes ICC’s chimney systems?

A. ICC emphasizes innovative engineering, making installation more efficient by reducing the number of components needed. Their chimneys are designed to be safe, efficient, and competitively priced.

Q. Does ICC offer solutions for both residential and industrial applications?

A. Yes, ICC provides solutions for residential use (such as wood and pellet stove vents) and for industrial applications (like high-pressure and grease ducts for commercial needs).

Q. Which brands are part of ICC?

A. ICC owns brands such as RSF Fireplaces, Renaissance Fireplaces, ICC Chimney, and Le BOL Grill, covering a wide array of heating and cooking solutions.

Q. Where can I purchase ICC products?

A. ICC products are distributed through specialty dealers and retailers. They recommend purchasing through these channels to ensure proper installation support and technical assistance.

Q. What warranties are available for ICC products?

A. ICC offers warranties that reflect the durability and reliability of their products. Specific warranty details vary by product type and brand.

Q. How does ICC support environmental sustainability?

A. ICC integrates sustainability by designing high-efficiency, clean-burning fireplaces and venting systems, ensuring lower emissions and better energy usage.

Q. At what stage during home building should I have my fireplace installed?

A. If you are building a new home, the best time to have your fireplace installed is immediately after the roof has been finished. At this point the inside walls are still typically open framing which allows for the fireplace to be placed and framed without damaging finished walls. The fireplace can be installed and set in place long before the finishing work is completed. Make sure you protect the glass door (keep it covered and removed from the work zone) until construction is complete.

Q. Will my fireplace operate during an electrical outage?

A. Yes. Since the fireplace works using natural draft, it never requires any electricity to function. It is safe to operate even if you have blowers installed to move the heat around.

  • The ICC Excel 6′′ Chimney Elbows are genuine ICC Excel products. These ICC Excel chimney parts are brand new and are packaged in their original ICC factory packing. Chimney Elbows from ICC allow you to offset a chimney.
     

    Issue rendering sage
  • Flue: .016" stainless steel
    Casing: .016" stainless steel
    Seam: Interior and exterior seams are continuous
    seam welded
    Insulation: Thermoplus continuous blanket
    Wall thickness: 1"
    Paint: All black EXCEL components are painted
    with Forrest “Stove Bright” flat black paint

    The flue extension fastens to the bottom of the first chimney length with three screws. It makes it possible to connect a stove pipe, or other type of connector, to the chimney. It is sometimes used to connect an EXCEL chimney directly to an appliance. The flue extension is designed to fit a variety of  stove pipes. However, due to variations from one manufacturer to another, some modification may be required in the field.

    Issue rendering sage
  • EXCEL chimney is specifically engineered for wood burning stoves, fireplaces and residential furnaces and it is suitable for use on appliances that burn:
    - Wood - Oil - Coal - Charcoal -

    Allowable Flue Gas Temperatures
    Max Continuous 650°C (1200°F) 
    Brief Forced Firing 925°C (1700°F)
    Tested To 1150°C (2100°F)

    Clearance to Combustible Materials
    2" clearance except in areas protected by factory-built supports certified for reduced clearance. EXCEL round and square supports permit the chimney to be installed with approximately 1 inch of clearance - in the area shielded by the support.

    Issue rendering sage
  • EXCEL chimney is specifically engineered for wood burning stoves, fireplaces and residential furnaces and it is suitable for use on appliances that burn:
    - Wood - Oil - Coal - Gas - Charcoal -

    Allowable Flue Gas Temperatures
    Max Continuous 650°C (1200°F) 
    Brief Forced Firing 925°C (1700°F)
    Tested To 1150°C (2100°F)

    Clearance to Combustible Materials
    2" clearance except in areas protected by factory-built supports certified for reduced clearance. EXCEL round and square supports permit the chimney to be installed with approximately 1 inch of clearance - in the area shielded by the support.

    Issue rendering sage
  • This flashing allows you to quickly and easily install a chimney through the peak of a roof without being forced to order a custom part.  The adjustable peak flashing can adjust to meet any pitch between 2/12 to 12/12.  Made of galvalume steel which is considerably more corrosion resistant than galvanized.

    Issue rendering sage
  • Snow wedge for sloped roofing. 
    Construction:
    Flue: .016" stainless steel
    Casing: .016" stainless steel
    Seam: Interior and exterior seams are continuous
    seam welded
    Insulation: Thermoplus continuous blanket
    Wall thickness: 1"
     

    Issue rendering sage
  • Allows you to install a round or square support (ERDS, ES, and ESS) without the need for wood framing. The maximum chimney support capability is 30 feet. The maximum center-to-center joist spacing is 24".
    Construction:
    Flue: .016" stainless steel
    Casing: .016" stainless steel
    Seam: Interior and exterior seams are continuous seam welded
    Insulation: Thermoplus continuous blanket
    Wall thickness: 1

    Issue rendering sage
  • This is the official ICC Excel Chimney Attic Radiation Shield for Cathedral Ceilings.
     Similar to the radiation shield, only this component is designed for freestanding wood stove installations where insulated chimney passes through a cathedral ceiling. The ERSCA has a flange at its base to connect a radiation shield tube.

    Issue rendering sage
  • The deluxe cap is made from .025" thick type 304 stainless steel and carries a lifetime 100% full replacement warranty.

    Issue rendering sage
  • The deluxe cap is made from .025" thick type 304 stainless steel and carries a lifetime 100% full replacement warranty.

    Issue rendering sage
  • The wall support (EWS) is used to support a vertical chimney on a through-the-wall installation. The EXCEL Wall Support installs on the first length of chimney above the tee, (not below the tee, thus making it easier to fasten the support to framing, instead of into concrete). The Wall Support utilizes the universal band to fit 6, 7, & 8 inch chimneys. It is designed to slide in and out to fit a variety of wall profiles. The Wall Support is also used as a lateral support every 8 feet in height. The Extended Wall Support (EWSE) will allow the chimney to pass by a 12" overhang. It often eliminates the need to either offset a chimney around the overhang or cut and finish the soffit and fascia. One support is required every 8’, minimum of two per system. The Old Style Wall Support (EWS-R) is generally more complicated to install than the EWS. However it simplifies installations on irregular surfaces like vinyl siding.

    Issue rendering sage
  • EXCEL chimney is specifically engineered for wood burning stoves, fireplaces and residential furnaces and it is suitable for use on appliances that burn:

    - Wood - Oil - Coal - Gas - Charcoal -

    Allowable Flue Gas Temperatures
    Max Continuous 650°C (1200°F) 
    Brief Forced Firing 925°C (1700°F)
    Tested To 1150°C (2100°F)

    Issue rendering sage
To top