Osburn Everest II Wood Fireplace



Attractive, efficient and particularly ecological, the all-new Everest II is the ultimate addition to revive any living space. The classicism of its faceplate offers straight lines that suits any decor to enhance your family reunions, moments of relaxation or romantic evenings, in addition to being your best ally during the cold winter weather.

Made with care in Quebec, this easy-to-use non-catalytic wood fireplace has retractable cast iron double doors that you can enhance with a firescreen door to fully experience the crackle of the wood fire. A black or brushed nickel overlay is available for your convenience.

Required Accessories:

Requires the addition of one each of (A) and (B) required accessories to complete the unit


  • OA10620  Black Door Overlay
  • OA10622  Brushed Nickel Door Overlay


  • OA10619  Traditional Style Faceplate


  • AC01379  Fire Screen Door
  • AC01347  4''Ø Fresh Air Intake Register With Airtight Damper




Fuel type : Dry cordwood
Recommended heating area (sq. ft.): 750 - 2,500
Overall firebox volume : 3.0
EPA loading volume (cu. ft.): 2.61
Maximum burn time : 9 h
Maximum heat output (dry cordwood) : 85,000 BTU/h (24.9 kW)
Overall heat output rate (min. to max.): 18,057 BTU/h (kW) to 49,654 BTU/h (kW)
Average overall efficiency (EPA cribs/Douglas fir) : N.A. (HHV) N.A. (LHV)
Average overall efficiency (dry cordwood) : 65.7 % (HHV) 70.8 % (LHV)
Optimum efficiency : 72 %
Average particulate emissions rate : 0.99 g/h

Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(Average Overall Efficieny) As measured per CSA B415.1-10 stack loss method.

(HHV) Higher Heating Value of the fuel.

(LHV) Lower Heating Value of the fuel.

Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

Optimum overall efficiency at a specific burn rate (LHV).

 This appliance is officially tested and certified by an independent agency.




Combustion technology: Non-catalytic
High-efficiency certified appliance: Yes, EPA 2020 approved
Maximum log length: 18"
Log positioning: Over width
Chimney diameter: 6"
Flue outlet diameter: 6"
Type of chimney: CAN/ULC S604, UL 103 (1700 °F) - CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet): 15'
Baffle type: N.A.
Door type: Double, glass with cast iron frame
Glass type: Ceramic glass
Glass surface – dimensions (Width X Height): 18 3/4" X 11 3/8"
Glass air-wash system: Yes
Overall dimension (Height): 49 1/8"
Overall dimension (Width): 41 3/4"
Overall dimension (Depth): 29" 
Door opening – dimension (Height): 10 1/4''
Door opening - dimension (Width): 20 3/4''
Firebox – dimension (Height): 16 7/8''
Firebox – dimension (Width): 18 7/8''
Firebox – dimension (Depth): 17''
Moulded refractory bricks: Yes
Stainless-steel secondary-air system improving gas combustion: Yes
USA standard (emissions): EPA
Canadian Standard (emissions): CSA B415.1-10
Canadian standard (safety): ULC-S610
Tested and listed as per applicable standards: By an accredited laboratory (CAN/USA)
Warranty: Limited lifetime

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)

                                                          Canada   USA

Clearance – non-combustible surround (top) 4" 4"
Clearance – top (measured from the platform on which the appliance is installed)** 84" 84"
Clearance – combustible side mantle to unit 8" 8"
Clearance – combustible top mantle to unit 24" 24"
Clearance – combustible side wall to unit 21" 21"
Clearance – top shelf to unit 48" 48"

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.


To top